EUKLID 2004.3 3D-CAD/CAM

游客，本帖隐藏的内容需要积分高于 1 才可浏览，您当前积分为 0

资源信息： 中文名: EUKLID 2004.3 版本: (3D-CAD/CAM) 发行时间: 2004年 制作发行: http://www.dynageo.de/ 地区: 德国 概述:

http://www.briegel-online.de/mathe/m7/euklid-7-5.JPG EUKLID是一套3D-CAD/CAM系统，能创建最优化的自由形状表面，为铸造、锻造建模提供了详细的解决方案 EUKLID Forging. A functional overview. The numerous individual functions of EUKLID Forging provide a solution for every forging-related task, efficiently and conveniently: Design of flexible removal draughts Design of the flash line Design of the flash removal tools Partial expansion Partial calibration Derivation of the preform geometry Design of flexible removal draughts The separation of the die block into the upper and lower dies by means of the parting curve is a demanding task when designing the tool. The separation must be calculated exactly so that the workpiece can be released from the tool after forging and the superfluous material can be removed from the forged component. This process is complicated, as depending on the nature of the workpiece, the parting curve does not lie in one plane. EUKLID Forging supports the definition of the removal draughts and thus solves the problem. The removal draughts can be defined to be variable while maintaining a minimum extraction angle and without alignment errors between the parting curve and the appropriate half of the die. The alignment between the parts of the tool can thus be accurately determined. Design of the flash line The outflowing of the forging material is controlled in the design by defining the flash line along the parting curve. In order to make an optimum calculation, EUKLID takes into account all specified parameters such as the shape of the cross section, orientation and sizing. Using EUKLID Forging, complex flash line surfaces with stepped parting lines and variable profile can be created in a short time. If the user wants to change complete surfaces, define new intermediate profiles or change the position of these, EUKLID Forging automatically re-calculates the appropriate flash line. Additional manipulating functions are also available with which the flash surface can be partially optimised.